Made in China R25, R32, T38, T45 and T51 threaded MF rods
Product Description
HSender drill pipe uses a thread system. Using it as the first drill pipe of an ordinary drill string can further improve drilling accuracy. Additionally, since this is a speed rod design, it will produce a straighter hole and at least 10% higher penetration in good rock conditions than a rod and connecting sleeve combo system.
As we all know, the performance of materials can only reach its maximum potential after heat treatment, so the selection of materials and heat treatment process are equally important.
(1) Threaded connection: R22, R25, R32, R38, T38, T45, T51, etc.
(2) Diameter: OD32, OD38, HEX32, HEX35, etc.
(3) Length: 600-6400mm.
(4) Packing: wrapped in wooden boxes or plastic braid and packed into bundles or as per your requirements.
HSender can make lengths and threads to your specifications!
Specification
Product |
Description |
Length |
|
(mm) | (ft/inch) | ||
Extension Rod ( MF ) | MF-T38-1830 | 1830 | 3/5' |
MF-T38-3050 | 3050 | 1' | |
MF-T38-3660 | 3660 | 1' 1/5 | |
MF-T38-4915 | 4915 | 1' 3/5 | |
MF-T38-6095 | 6095 | 2' | |
MF-T45-1830 | 1830 | 3/5' | |
MF-T45-3050 | 3050 | 1' | |
MF-T45-3660 | 3660 | 1' 1/5 | |
MF-T45-4915 | 4915 | 1' 3/5 | |
MF-T45-6095 | 6095 | 2' | |
MF-T51-1830 | 1830 | 3/5' | |
MF-T51-3050 | 3050 | 1' | |
MF-T51-3660 | 3660 | 1' 1/5 | |
MF-T45-4915 | 4915 | 1' 3/5 | |
MF-T51-6095 | 6095 | 2' | |
MF-T51-4270 | 4270 | 1' 2/5 | |
MF-T45-5525 | 5525 | 1' 4/5" | |
MF-T51-6095 | 6095 | 2' |